TT 426-10 Double Mitre Saw

Description

  • Machine bed made of steel sheet, cutting length 6000mm standard and 4500mm and 7500mm optional
  • Solid cast construction for length and angle accuracy
  • Saw with 650mm saw blade diameter and 7.5kW motor
  • Wide range of cutting angles and a capacity to handle the most difficult applications
  • Pivoting range with digital angle display
  • Chop and oversize length cuts (min 4mm, max 7500mm)
  • Profile lifting bars
  • Automatic closing safety hood to protect the operator
  • Two standard vertical clamping systems and one optional horizontal clamping system to ensure optimum profile fixing
  • Data transfer by means of Network connection or USB
  • Item number, length dimensions, angles and quantities can be programmed on the control panel (2000 x 10: able to cut in different program)
  • Pulse spray mist blade lubricant system
  • Aluminium wedge cutting
  • The tilt and pivoting rotation movements of the saw are made by the servo controller

Technical

  • Power supply: 400V, 3ph, 50-60Hz
  • Total power output: 22kW
  • Saw blade speed: 2,000rpm
  • Saw blades diameter: 650mm (2 blades)
  • Saw blade motor power: 7.5kW
  • Pivoting range: Up to 22.5o inward & 135o outward (Manual)
  • Saw angles: (Tilt & pivot) 45o – 90o (Automatic)
  • Maximum cutting length at 90o: 6,000mm, 7,500mm, 8,500mm
  • Minimum cutting length at 90o: 550mm
  • Minimum cutting length titled at 45o: 550mm
  • Minimum cutting length pivoted at 45o: 850mm
  • Air pressure: 6-8 bar
  • Air consumption: 70 l/min
  • Machine height: 2,750mm
  • Machine width: 2,2900mm
  • Machine length: 11,700mm/10,200mm/8,700mm

Optional

Machine can be produced in 4500mm and 7500mm lengths upon request

Hydro-pneumatic saw feed

Label printer

Short cut stop

Dust and chips extraction system

Additional roller conveyor for the fixed head

Cooling system for the electric cabinet