NR 242 PVCu Profile Machining Centre


  • All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by a computer. The two machining stations for profiles, with reinforcement steel, increase production capacity
  • Stacking of 10 profiles (max. 6.5m length)
  • Servo controlled automatic swing of the saw to all angles between 30o and 150o
  • Drain slot routing, drilling and routing at variable angles
  • Automatic screwing of steel reinforcement
  • Drilling of fixation and hinge holes together with the reinforcement steel
  • Automatic conveyor belt system to transport scrap profiles to waste container
  • Waste profiles longer than 500mm can be reprocessed
  • Manual barcode labeling system integrated with single-lines
  • Easy production control with the 2nd screen on the transfer station
  • 19” LED monitor
  • High performance industrial PC with Windows 10 embedded, which works between 0o & 55o
  • All error messages can be monitored from the screen
  • By online connection to the entire system, remote detection of malfunctions and maintenance is available
  • Data transfer is available via network connection or USB interface
  • Full integration with various window and door production software
  • Central lubrication system eases maintenance


  • Power supply: 400V, 3ph, 50-60Hz
  • Power output: 30kW, 80A
  • Saw diameter: 500mm
  • Max profile height: 140mm
  • Min profile height: 35mm
  • Max profile width: 130mm
  • Min profile width: 35mm
  • Max raw profile length: 6,500mm
  • Min raw profile length 500mm
  • Max profile length: 3,500mm
  • Min profile length: 330mm
  • Air pressure: 6-8bar
  • Air consumption: 1200 l/min
  • Machine height: 2,350mm
  • Machine length: 17,700mm
  • Machine width: 10,000mm
  • Machine weight: 10,800kg


End milling unit for two different profile cross sections.