Blitz Alva 550 – Double Head Sawing Machine

Description

A double-head sawing machine with 550mm diameter tungsten carbide blades with motorized movement of the mobile head and electro-pneumatic control of the head tilting.

 

Available versions:

Blitz Alva 550 Version A – double head sawing machine 4m                                             

Blitz Alva 550 Version A – double head sawing machine 5m                                              

Blitz Alva 550 Version A – double head sawing machine 6.6m                                           

Blitz Alva 550 Version C – double head sawing machine 4m                                               

Blitz Alva 550 Version C – double head sawing machine 5m                                               

Blitz Alva 550 Version C – double head sawing machine 6.6m                                           

Blitz Alva 550 Version E – double head sawing machine 4m                                               

Blitz Alva 550 Version E – double head sawing machine 5m                                               

Blitz Alva 550 Version E – double head sawing machine 6.6m

Technical

  • Head tilting: 90° – 45° – 22.5° and intermediate angles achieved using stops at the front of the machine, protected against chops
  • 2 No. tungsten carbide saw blades Ø 550mm, hole Ø 32mm
  • Oleo-pneumatic advance of the blade (adjustable blade exit speed – quick return)
  • Cutting zone guards
  • 3 No. pneumatic horizontal vices
  • 2 No. pneumatic vertical vices
  • Customised devices to clamp special profiles (on request)
  • Movable head roller table 2.5 m
  • Direct motor to blade transmission
  • First head fixed, second head mobile with automatic positioning. Positioning is taken care of by a Brushless motor with decimal precision
  • Minimum cutting capacity between the two heads: 370 mm (can be reduced with specific software)
  • Maximum cutting capacity between the two heads: 4 – 5 – 6.6 m depending on the version supplied (can be increased with specific software)
  • Separate electrical and pneumatic cabinets, both placed for easy inspections
  • Set up for the extraction of chips and fumes
  • Working pressure: 7 bar
  • Real time control of functions by NC
  • Membrane-type control keyboard protected from dust and chips
  • Large size swarf collection box to allow easy collection
  • Set up to take conveyor belt for collecting offcuts and a motorized chips collection conveyor belt
  • Chips discharging in the collection box or swarf belt (optional)
  • Blade motors, three-phase 3HP (2.2 kW) – 2800 rpm Euro voltage 230/400V– 50Hz; 275/480V – 60 Hz
  • No. 2 flashing lights (on the heads and on the roller tables, one of which is buzzer) which warn when the machine is in operation